HIKVISION iDS-TCV500-BI User Manual

Network Traffic Camera • User Manual
34
Set Record Schedule
Purpose:
You can follow the instructions to set the scheduled recording. By default, the record files of
scheduled recording are stored in the TF card.
Steps:
Go to Configuration > Device Configuration > Encoding and Storage > Record Schedule.
Record Schedule Configuration
Select Record Stream.
(Optional) Check Enable Recording Overwriting.
 If you enable the function, when the storage space is full, the former record files will be
overwritten.
 If you disable the function, when the storage space is full, the notice that the space is full will
be reminded.
Check Enable Record Schedule.
Click Edit to edit the record schedule.

HIKVISION iDS-TCV500-BI Specifications

General

Card reader integrated	Yes
Maximum memory card size	128 GB
Maximum resolution	2464 x 2056 pixels
Image quality adjustment	Saturation, Brightness, Contrast, Sharpness, DNR
Video compression formats	H.264, H.265
Placement supported	Outdoor
Signal-to-Noise Ratio (SNR)	60 dB
Number of users	32 user(s)
Supported network protocols	TCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
Focus	Motorized/Manual
Minimum illumination	0.001 lx
Housing material	Aluminum
International Protection (IP) code	IP66