EasyManuals Logo

HIKVISION iDS-TCV500-BI User Manual

HIKVISION iDS-TCV500-BI
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
Network Traffic Camera • User Manual
53
Set picture Close-up Zooming Ratio. You can select Close-up Zooming Ratio from 1 to 8.
The higher the value is, the larger the close-up is.
Select Close-up Picture No. from the drop-down list. It refers to the picture where the
close-up comes from.
Set Plate Close-up Offset. It refers to the pixel number from license plate to bottom line
of captured picture.
Click Save to save the settings.
Set Vehicle Feature
Go to Configuration> Device Configuration > Capture Parameters > Vehicle Feature.
Vehicle Feature Configuration
Check Vehicle Features types.
1) Check Enable Vehicle Color Recognition, Enable Car Logo Recognition, etc. to enable
the functions.
2) Set corresponding sensitivity according to detection situations.
Click Save to save the settings.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION iDS-TCV500-BI and is the answer not in the manual?

HIKVISION iDS-TCV500-BI Specifications

General IconGeneral
Card reader integratedYes
Maximum memory card size128 GB
Maximum resolution2464 x 2056 pixels
Image quality adjustmentSaturation, Brightness, Contrast, Sharpness, DNR
Video compression formatsH.264, H.265
Placement supportedOutdoor
Signal-to-Noise Ratio (SNR)60 dB
Number of users32 user(s)
Supported network protocolsTCP/IP, HTTP, HTTPS, FTP, DNS, DDNS, RTP, RTSP, RTCP, NTP, UPnP, IPv6, UDP
FocusMotorized/Manual
Minimum illumination0.001 lx
Housing materialAluminum
International Protection (IP) codeIP66

Related product manuals