HIKVISION IDS-TCV900-BI User Manual

Network Traffic Camera • User Manual
67
you select Recording Start Time as 2, record will start after the second picture are
captured.
Advanced Settings
(Optional) Copy the configuration of current lane to other lanes.
Select Traffic Light Signal Input according to the actual conditions. RS-485, External
Input, Video Analysis Interface and Network Mode are selectable.
Set the parameters under different traffic light signal input.
 External Input
External Input Configuration
1) Select External Input No.
2) Select Electrical Level Status of Red Light according to the actual conditions. Red Light
on Low Level and Red Light on High Level are selectable.
 RS-485
RS-485 Configuration
1) Select Linked Red Light Channel according to the actual connection of detector.
2) Select Yellow Light Related Channel No. according to the actual connection of
detector.
 Video Analysis Interface

HIKVISION IDS-TCV900-BI Specifications

General

Brand	HIKVISION
Model	IDS-TCV900-BI
Category	Security Camera
Language	English