HIKVISION iVMS-4200 User Manual

Network Camera User Manual
11
 Refer to the Figure 2-2 to set network camera over the LAN via a switch or a
router.
Figure 2-1 connecting Directly
Figure 2-2 Connecting via a Switch or a Router
2.1.2 Activating the Camera
You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via SADP, and Activation via Client Software are all supported.
 Activation via SADP Software
SADP software is used for detecting the online device, activating the camera, and
resetting the password.
Get the SADP software from the supplied disk or the official website, and install the
SADP according to the prompts. Follow the steps to activate the camera.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select the inactive device.

HIKVISION iVMS-4200 Specifications

General

Brand	HIKVISION
Model	iVMS-4200
Category	Security Camera
Language	English