Network Camera User Manual
79
Steps:
1. Enter the User Management interface: Configuration > Advance
Configuration > Security > User
Figure 10-1 User Management Interface
The admin user has all permissions by default and can create/modify/delete other
accounts.
The admin user cannot be deleted and you can only change the admin password.
Steps:
1. Click Add to add a user.
2. Input the User Name, select Level and input Password.
Notes:
●
Up to 31 user accounts can be created.
● Users of different levels own different default permissions. Operator and user
are selectable.
● STRONG PASSWORD RECOMMENDED–We highly recommend you
create a strong password of your own choosing (using a minimum of 8
characters, including at least three of the following categories: upper case
letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. And we recommend you reset your
password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
3. You can check or uncheck the permissions for the new user.
4. Click OK to finish the user addition.
To Next Page
Loading...
Need help?
General
