Do you have a question about the Hill-Rom Compella Bariatric Bed and is the answer not in the manual?
Brand | Hill-Rom |
---|---|
Model | Compella Bariatric Bed |
Category | Medical Equipment |
Language | English |
Lists and describes the various control buttons on the caregiver panel.
Lists and describes the indicator lights and displays on the caregiver panel.
Procedure to enable bed lockout features using the lock button and specific controls.
Procedure to disable bed lockout features using the lock button and specific controls.
Procedure to deflate the air surface using the CPR mechanism.
Procedure to level the bed by lowering the head section using the CPR handle.
Step-by-step instructions for zeroing the bed scale before patient use.
Procedure for weighing a patient using the bed scale after it has been zeroed.
Describes the different modes for bed exit detection: Patient Position, Exiting, and Out of Bed.
Steps to activate the bed exit monitoring system and select a mode.
Steps to deactivate the bed exit monitoring system.
How to silence the bed exit system before an alert occurs.
How to silence the bed exit system while an alert is active.
How to enable the Head-of-Bed angle alert for maintaining patient head elevation.
How to disable the Head-of-Bed angle alert.
Steps to activate the Turn Assist feature for patient repositioning.
How to activate the Max Inflate feature for easier patient repositioning.
How to deactivate the Max Inflate feature.
Steps to activate Continuous Lateral Rotation Therapy (CLRT) for pulmonary care.
How to activate the Seat Deflate feature to facilitate patient transitions to and from the bed.