Need help?Do you have a question about the Hill-Rom Isolette C2000 and is the answer not in the manual?
General| Brand | Hill-Rom |
|---|---|
| Model | Isolette C2000 |
| Category | Medical Equipment |
| Language | English |
Manual provides requirements for Isolette Infant Incubator operation and maintenance.
Manual intended for facility-authorized personnel only. Failure can cause injury or damage.
Manual contains seven chapters outlining operation, troubleshooting, and maintenance.
Describes Isolette Infant Incubator features: temp control, digital displays, trend display, and alarm system.
Provides guidance on safe operation and refers to the User Manual for additional precautions.
Details key physical and functional aspects like access doors, tilt mechanism, and optional systems.
Details physical, electrical, and oxygen control specifications of the incubator.
Critical safety warnings and advice for operating and maintaining the Isolette Infant Incubator.
Explains typefaces, icons, and symbols used in the manual for clarity.
Defines key technical terms related to incubator performance and measurements.
Illustrates and explains various warning and caution labels found on the incubator.
Guidance on initiating the troubleshooting process and following procedural steps.
Steps to gather information from operators to identify potential causes of problems.
Procedures to verify proper operation of the incubator after assembly or maintenance.
Details on various alarms, including temperature, system failures, and their indicators.
Explains access and use of diagnostic menus for system configuration and testing.
Troubleshooting steps for issues with the incubator's adjustable pedestal/stand movement.
Diagnostic steps for addressing a low set temperature alarm condition.
Troubleshooting guide for low oxygen concentration alarms in the incubator.
Steps to resolve issues causing high oxygen concentration alarms.
Concluding steps including maintenance and administrative tasks after troubleshooting.
Details the block diagram and components of the controller unit.
Explains the wiring diagram for the variable height adjustable pedestal/stand.
Covers functional block and schematic diagrams for the hood/shell assembly.
Describes the electrical system, including sensor module, power supply, and indicators.
Details the connector and signals for the scale module's serial data communication.
Explains the circuit that controls and monitors the DC fan speed and operation.
Describes the temperature data acquisition circuit, multiplexing, and calibration.
Explains the humidity sensor operation, capacitance measurement, and frequency output.
Details the PIC microcontroller's function, timing, and integrated watchdog timer.
Describes digital multiplexers and buffered line drivers used for signal processing.
Explains the 8-channel, 12-bit A/D converter and its interface for signal processing.
Details the controller's input voltage/frequency acceptance and power output capabilities.
Explains the IMD circuit that monitors impeller rotation speed and detects errors.
To Next Page