Hill-Rom Isolette C2000 - Function Checks

Function Checks
Chapter 2: Troubleshooting Procedures
Yes No
y — Go to “Function Checks” on page 2-4.
4. Instruct the operator to refer to the procedures in the Isolette® Infant
Incubator User Manual. To ensure proper operation of the Isolette® Infant
Incubator, perform the “Function Checks” on page 2-4.
Function Checks
A
Before the incubator is first placed into service, and after any disassembly for
cleaning or maintenance, perform Function Checks.
WARNING:
Do not use the incubator if it fails to function as described. Refer service
to qualified personnel.
SHOCK HAZARD:
Make sure that the building power source is compatible with the
electrical specifications shown on the right side of the incubator and the
variable height adjustable pedestal stand. For proper grounding
reliability, connect the power cord only to a properly marked, three-wire,
hospital-grade or hospital-use receptacle. Do not use extension cords.
WARNING:
To prevent injury or damage to the variable height adjustable pedestal
stand when transporting, employ a person of sufficient strength to
adequately contro] the incubator.
CAUTION:
When using the variable height adjustable pedestal stand, always lower
the incubator to its lowest position prior to transport for optimum
stability.
1. Initial Actions have been performed.
Yes No
{$ > Goto “Initial Actions” on page 2-3.
2. Connect the pedestal stand AC power cord, and apply power:
a. Connect the pedestal stand power cord to an AC source.
Page 2-4 Isolette® Infant Incubator Service Manual (man223rf)