Hill-Rom Isolette C2000 - Model Ldentificationandserieschanges; Model Identification and Series Changes

Model Identification and Series Changes
Chapter 1: Introduction
Model Identification and Series Changes
For Isolette® Infant Incubator model identification, see table 1-4 on page 1-13.
Table 1-4. Model Identification
Model/Series Number . Description
C2000 Isolette® Infant Incubator
For Isolette® Infant Incubator hood/shell assembly series identification, see
table 1-5 on page 1-13.
Table 1-5. Series Identification for the Hood/Shell Assembly
Model/Series Number Description
C2HS-1, C2HS1-400 Isolette® Infant Incubator hood/shell assembly
with panel slide latches
C2HS01, C2HS-1, Isolette® Infant Incubator hood/shell assembly
C2HS-1400 with pawl latches
C2HS-02 Isolette® Infant Incubator hood/shell assembly
with hood lock
C2HS-03 Isolette® Infant Incubator hood/shell assembly
with modification 170
For Isolette® Infant Incubator controller series identification, see table 1-6 on
page 1-13.
Table 1-6. Series Identification for the Controller
Model/Series Number Description
C2C-2-00 Isolette® Infant Incubator controller
Isolette® Infant Incubator Service Manual (man223rf) Page 1 - 13