Hill-Rom Isolette C2000 - Page 28

Model Identification and Series Changes
Chapter 1: Introduction
For Isolette® Infant Incubator fixed pedestal stand assembly series
identification, see table 1-7 on page 1-14.
Table 1-7. Series identification for the Fixed Pedestal Stand Assembly
Model/Series Number Description
C2STD1-00
Isolette® Infant Incubator fixed pedestal stand
assembly with upper and lower column extrusion
C2STD1-01 Isolette® Infant Incubator fixed pedestal stand
assembly with upper and lower column weldment
C2STD2-00 Isolette® Infant Incubator fixed pedestal stand
assembly
For Isolette® Infant Incubator variable height adjustable pedestal stand
assembly series identification, see table 1-8 on page 1-14.
Tabie 1-8. Series Identification for the
Variable Height Adjustable Stand Assembly
Model/Series Number Description
C2VHA-1-00 Isolette® Infant Incubator variable height
adjustable pedestal stand assembly
For Isolette® Infant Incubator humidity system series identification, see table
1-9 on page 1-14.
Table 1-9. Series Identification for the Humidity System
Model/Series Number Description
C2RH-1-00 Isolette® Infant Incubator humidity system
C2RH-1-01 Isolette® Infant Incubator humidity system
C2RH-2-00 Isolette® Infant Incubator humidity system with
manifold assembly
Page 1-14 Isolette® Infant Incubator Service Manual (man223rf)