Hillrom LI900B4 - Settings

194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use Page 53
Mobilizing the patient
Settings
Choosing the language
Your bed is configured for the destination country. In this menu, you can
set the language of the GCI.
1. Press Parameters on the GCI.
2. Press Settings.
3. Press Language and
select the language.
4. Press Close to confirm.
Setting the date and time
In this menu, you can change the format of the date and time
displayed on the bed. You can also set the time, for example when
the clocks go forwards or back (DST (Daylight Saving Time).
1. Press Parameters on the GCI.
2. Press Settings.
3. Press Date / Time.
4. Select the date format and use the arrows to set the time.
5. Press Save to confirm.
Setting the alerts volume
1. Press Parameters on the GCI.
2. Press Settings.
3. Press Volume.
4. Use the + and - buttons to adjust the volume.
5. Press Save to confirm.
Setting the length of the alert suspension mode
1. Press Parameters on the GCI.
2. Press Settings.
3. Press Suspend Mode Duration.
4. Select the duration.
5. Press Save to confirm.