194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use Page 85
Movements/Transfers
Movements/Transfers
Brake and steer system
Brake and steer system
Always put the brake in the “STOP” position, except during transport. Once the
brakes have been applied, push and pull the bed to make sure that it does not
move.
The brake bar, located at the foot of the bed, or the bilateral pedals at the head
end, simultaneously control all four casters, including one steering caster.
It has three positions:
• “STOP” to prevent the bed from moving,
• “NEUTRAL” to move the bed in all directions,
• “STEERING” for easier movement in a straight line.
STOP NEUTRAL STEERING Label
To Next Page
Loading...
Need help?
General
