194412(11) - Hill-Rom® 900 Accella™ Bed - Instructions For Use Page 77
Help with care
Drainage bag holder pins
The urine bags attached to my pins will not be taken into account in weighing.
Oxygen cylinder holder (AC959A-AD101A-AD102A)**
Safe working load: 15 kg
(1)
The oxygen cylinder holder is designed to accept an oxygen cylinder and must
only be fitted on the patient helper supports at the head end of the bed outside the
sleep surface. It can be rotated through 80°. Each type of holder corresponds to a
cylinder model and must never be used with a different cylinder. See below.
AC959A for
cylinder model
B5 (Ø1)
AD101A for
cylinder model D
(Ø100)
AD102A for
cylinder model E
(Ø100)
1. The safe working load specifications allow for a substantial safety margin.
To Next Page
Loading...
