Chapter 1 Introduction | Hillstone
Hillstone SG-6000 E-Series Hardware Reference Guide
The trial license has expired and there is no
legitimate license installed in the system.
The system is running normally.
Power Supply PS0 is running normally.
Power Supply PS0 is running normally, but its fan
has failed. Change the power supply immediately.
Power Supply PS0 is powered off or has failed.
Power Supply PS1 is running normally.
Power Supply PS1 is running normally, but its fan
has failed. Change the power supply immediately.
Power Supply PS1 is powered off or has failed.
Not using HA, this device is the master device.
Two devices are in an HA cluster. This device is
working as the master.
Two devices are in an HA cluster. This device is
working as the slave.
High Availability is disabled.
The cooling system is running normally.
One of the fans has failed, but the cooling system
can still fully function. Change the fan tray as soon
as possible.
The cooling system has a serious error or the fan
tray is not fully inserted. The system will
automatically shut down in 15 seconds.
The link between this port and its peer device is in
normal status.
The link between this port and its peer device has
failed.
The port is sending or receiving data.
No data is transmitted on this port.
The link between this port and its peer device is in
normal status.
The port is sending or receiving data.
There is no connection between this port and its peer
device, or the link between this port and its peer
device fails.
The device discovers the built-in WLAN module.
The WLAN module is sending or receiving data.
The device discovers the built-in 4G Express module.
The 4G module is sending or receiving data.
To Next Page
Loading...
