Hilti C 4/12-50 Original Operating Instructions

6 English 2373346
*2373346*
cause a short circuit at the battery terminals or the charging contacts.
A short circuit between the battery terminals or charging contacts may
cause injuries (burns) and result in fire.
▶ Do not store the battery on the charger. Always remove the battery from
the charger when the charging operation has completed.
2.3 Careful handling and use of batteries
▶ Comply with the following safety instructions for the safe handling
and use of Li-ion batteries. Failure to comply can lead to skin irritation,
severe corrosive injury, chemical burns, fire and/or explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage
of fluids that are extremely harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject
them to temperatures over 80 °C (176 °F).
▶ Never use or charge a battery that has suffered an impact or been
damaged in any other way. Check your batteries regularly for signs of
damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated tempera-
ture, sparking, or open flame. This can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other
electrically conductive objects. This can damage the battery and also
cause material damage and personal injury.
▶ Keep batteries away from rain, moisture and liquids. Penetrating moisture
can cause short circuits, electric shock, burns, fire and explosions.
▶ Use only chargers and power tools approved for the specific battery
type. Read and follow the relevant operating instructions.
▶ Do not use or store the battery in explosive environments.
▶ If the battery is too hot to touch, it may be defective. Put the battery
in a place where it is clearly visible and where there is no risk of fire,
at an adequate distance from flammable materials. Allow the battery
to cool down. If it is still too hot to touch after an hour, the battery is
faulty. Consult Hilti Service or read the document entitled "Instructions
on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage
and use of lithium-ion batteries.
Read the instructions on safety and use of Hilti Li-ion batteries
that you can access by scanning the QR code at the end of these
operating instructions.

Hilti C 4/12-50 Specifications

General

Product type	Battery & charger set
Suitable for	-
Input voltage	230 V
Product color	Black, Red
Battery voltage	- V
Battery capacity	12 Ah
Charging current	4 A
Charging voltage	12 V
Country of origin	Germany
Power source type	AC
Brand compatibility	Hilti
Number of batteries included	1 pc(s)
Number of batteries supported	1
LED indicators	Yes
Package depth	45 mm
Package width	70 mm
Package height	37 mm
Package weight	300 g
Battery size	B
Batteries included	No
Operating temperature (T-T)	0 - 60 °C
Number of shipping (inner) cases per master (outer) case	15 pc(s)

Weight and Dimensions

Depth	90 mm
Width	137 mm
Height	60 mm
Battery weight	50 g