Hilti C 4/12-50 Original Operating Instructions

*2373346*
2373346 English 5
▶ Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
▶ Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
▶ Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
▶ Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
▶ Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe
handling and control of the tool in unexpected situations.
Service
▶ Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
2.2 Battery charger use and care
▶ To avoid injury, use the charger only to charge Hilti Li-ion batteries
approved for use with this charger.
▶ The location at which the charger is used should be clean, cool, dry and
protected from frost.
▶ The charger must be able to emit heat while in operation. The air vents
must therefore remain unobstructed. Do not operate the charger inside
a closed container.
▶ Maintain the product carefully. Make sure that no parts are broken or
damaged in such a way that the product no longer functions correctly. If
parts are damaged or broken, have the product repaired prior to further
use.
▶ Use chargers and the corresponding batteries in accordance with these
instructions and as is specified for this particular model. Use of chargers
for applications different from those intended could result in hazardous
situations.
▶ Recharge the batteries only with the chargers specified by the manufac-
turer. A charger that is suitable for a certain type of battery may present
a risk of fire when used with other types of battery.
▶ When not in use, keep the battery and the charger away from paper
clips, coins, keys, nails, screws or other small metal objects that could

Hilti C 4/12-50 Specifications

General

Product type	Battery & charger set
Suitable for	-
Input voltage	230 V
Product color	Black, Red
Battery voltage	- V
Battery capacity	12 Ah
Charging current	4 A
Charging voltage	12 V
Country of origin	Germany
Power source type	AC
Brand compatibility	Hilti
Number of batteries included	1 pc(s)
Number of batteries supported	1
LED indicators	Yes
Package depth	45 mm
Package width	70 mm
Package height	37 mm
Package weight	300 g
Battery size	B
Batteries included	No
Operating temperature (T-T)	0 - 60 °C
Number of shipping (inner) cases per master (outer) case	15 pc(s)

Weight and Dimensions

Depth	90 mm
Width	137 mm
Height	60 mm
Battery weight	50 g