Why does my Hilti SF 22-A Drill or battery get very hot?
If your Hilti Drill or its battery gets very hot, it means that the tool is overloaded (application limits exceeded). Pay attention to the power and performance rating of the product before using it, i.e check its suitability for the job on hand.
Why can’t I press the on/off button on my Hilti Drill?
If you can’t press the on/off button on your Hilti Drill because it's locked, the forward/reverse selector switch is likely in the middle position. Set the forward/reverse switch to the desired position.
Why is there no hammering action on my Hilti SF 22-A Drill?
If your Hilti Drill has no hammering action, the operating mode is not set correctly at the selector ring. Set the power tool to “hammer drilling.”
What to do if the Hilti SF 22-A battery doesn’t engage with an audible double click?
If the battery doesn’t engage with an audible double click on your Hilti Drill, the retaining lugs on the battery are likely dirty. Clean the retaining lugs and push the battery in until it engages.
General| Voltage | 22 V |
|---|---|
| Weight | 1.8 kg |
| Chuck Type | Keyless |
| Speed Settings | 2 |
| Battery Type | Li-ion |
| Chuck size | 13 mm |
| Number of gears | 2 |
| Battery voltage | 22 V |
To Next Page
