*440881*
440881 English 15
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for driving and removing screws
and for drilling in steel, wood and plastic.
▶ Use only Hilti Liion batteries of the B 14 and B22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3 Charge status display
The charge status of the Liion battery is displayed after pressing the release button.
Status Meaning
4 LEDs light up. Charge status: 75 % to 100 %
3 LEDs light up. Charge status: 50 % to 75 %
2 LEDs light up. Charge status: 25 % to 50 %
1 LED lights up. Charge status: 10 % to 25 %
1 LED blinks. Charge status: < 10 %
Battery charge status cannot be displayed while the control switch is pressed.
3.4 Items supplied
Drill / driver, operating instructions.
• You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.group.
4 Technical data
4.1 Technical data
SFC 14A SFC 22A
Rated voltage
14.4 V 21.6 V
Weight in accordance with EPTA procedure 01
1.5 kg 2.4 kg
Speed in 1st gear
0 /min … 500 /min 0 /min … 600 /min
Speed in 2nd gear
0 /min …
1,700 /min
0 /min …
1,800 /min
Torque (max.)
24 Nm 28 Nm
Torque range (15 settings)
1.5 Nm … 10 Nm 1.5 Nm … 10 Nm
4.2 Battery
Battery operating voltage
14.4 V
Ambient temperature for operation
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 40 ℃
Battery charging starting temperature
−10 ℃ … 45 ℃
4.3 Battery
Battery operating voltage
21.6 V
Ambient temperature for operation
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 40 ℃
Battery charging starting temperature
−10 ℃ … 45 ℃
Printed: 18.09.2019 | Doc-Nr: PUB / 5071588 / 000 / 07