What to do if Hilti Cordless Saw LEDs do not light up?
If the LEDs on your Hilti Cordless Saw aren't lighting up, it could be due to a few reasons. First, make sure the battery is fully inserted until you hear a double click. Second, the battery might be empty and need charging. Finally, check if the transport lock is engaged and disengage it.
What to do if Hilti Cordless Saw 1 LED flashes?
If 1 LED flashes on your Hilti Cordless Saw, it indicates that the battery is discharged. You should change the battery and charge the empty one. Another possibility is that the battery is either too hot or too cold; in this case, bring the battery to the recommended working temperature.
Read this documentation before initial operation or use.
Explains signal words, document symbols, and illustration symbols.
Describes symbols on the product and provides product information.
Read all safety warnings, instructions, illustrations, and specifications.
Hold by insulated gripping surfaces, secure workpiece.
Use only perfect working order product, do not tamper, use sharp blades.
Details the parts of the reciprocating saw with numbered references.
Describes the product's intended use and possible misuse.
Explains LED indicators for battery charge and tool status.
Provides specifications for the saw and battery.
Warnings and precautions for safe operation.
Procedures for inserting and removing the battery.
Procedures for inserting and removing the saw blade.
Steps for turning the power tool on and off.
Instructions and safety for plunge cutting.
Steps to change the AVR contact shoe.
Guidelines for tool and battery care and maintenance.
Guidelines for transporting and storing cordless tools and batteries.
Addresses malfunctions like LEDs not lighting up or blade removal issues.
Addresses issues when the saw is in working order but has faults.
Information on recycling tools, batteries, and manufacturer's warranty.
To Next Page
General
