Why Hilti TE 3-M Rotary Hammer doesn't achieve full power?
If your Hilti Rotary Hammer isn't reaching its full power, the issue might be with the extension cord. Ensure you are using an extension cord that has an adequate conductor cross section to provide sufficient power to the tool.
What to do if my Hilti TE 3-M Rotary Hammer has no hammering action?
If your Hilti Rotary Hammer isn't hammering, there could be a couple of reasons: 1. **Tool is too cold:** Try bringing the tip of the drill bit into contact with the working surface, switch the rotary hammer on and allow it to run. If necessary, repeat the procedure until the hammering mechanism begins to operate. 2. **Function selector switch:** Check that the function selector switch is set to the “Hammer drilling” position and not “Rotary drilling only”.
How to fix a Hilti TE 3-M Rotary Hammer that doesn’t start?
If your Hilti Rotary Hammer isn’t starting, the problem might be due to an interruption in the electric supply. To check this, plug in another electric tool or appliance into the same outlet to see if it works.
General| Weight | 3.5 kg |
|---|---|
| Drilling diameter in concrete | 4 - 28 mm |
| Drilling diameter in wood | 3 - 30 mm |
| Hammer Drilling in Concrete | Yes |
| Drilling in Wood | Yes |
| Drilling in Metal | Yes |
| Forward/Reverse | Yes |
| Dust Removal Module Available | Yes |
| Voltage | 230 V |
| Tool Chuck Type | TE-C (SDS Plus) |
| No-load speed | 1100 rpm |
| Tool holder | TE-C (SDS Plus) |
| Working Mode | Hammer drilling |
Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product.
Warnings alert persons to hazards that occur when handling or using the product. The following signal words are used.
The following symbols can be used on the product.
Hilti products are designed for professional users and only trained, authorized personnel are permitted to operate.
Declaration of conformity.
The safety rules given in the following section contain all general safety rules for electric tools.
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Identifies and describes the various parts and controls of the tool.
Specifies the correct applications and usage for the rotary hammer.
Shows possible applications of the rotary hammer.
Lists the components included with the rotary hammer.
Provides the weight specifications for the TE 3-M and TE 3-C models.
Specifies the single impact energy rating for the tool.
Details the drilling diameter limits for concrete/masonry with hammer drill bits.
Details the drilling diameter limits for solid wood.
Details the drilling diameter limits for metal with solid-head drill bits.
Specifies the recommended storage temperature range for the tool.
Specifies the recommended ambient temperature range for operating the tool.
Instructions for changing the SDS quick-release chuck.
Guidance on correctly fitting and securing the side handle.
Procedure for fitting and removing drill bits with the SDS chuck.
Procedure for fitting and removing accessories with the three-jaw chuck.
Instructions for drilling operations without the hammer function.
Guidance on using the tool for screwdriving tasks.
Instructions for performing hammer drilling operations.
How to set and use the chiseling function.
Instructions for adjusting the chisel position.
How to change the direction of rotation (forward/reverse).
Procedure for adjusting the depth gauge for drilling depth control.
Instructions for attaching the dust collection module for overhead work.
How to operate and lock the control switch.
Instructions for replacing the dust shield.
Troubleshooting steps for when the rotary hammer fails to start.
Troubleshooting steps for when the hammer action is not functioning.
Troubleshooting steps for when the tool lacks full power.
To Next Page
