Need help?Do you have a question about the Hilti TE MD 20 MSHA and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| Drilling Diameter in Concrete | 20 mm |
| Drilling Diameter in Steel | 13 mm |
| Drilling Diameter in Wood | 30 mm |
| Hammer Drilling Diameter Range | 4-20 mm |
| Tool chuck type | SDS-plus |
| Dimensions (LxWxH) | 360 x 95 x 210 mm |
| Working mode | Hammer drilling, drilling |
| Length | 360 mm |
To Next Page
