What to do if 4 LEDs on the Hilti TE 6-A22 Rotary Hammer battery blink?
If 4 LEDs on the battery are blinking, it indicates that the Hilti Rotary Hammer has been briefly overloaded. To resolve this, release the control switch and then press it again.
Why is there no hammering action on my Hilti TE 6-A22?
There are a couple of reasons why your Hilti Rotary Hammer might not be hammering: * The rotary hammer might be too cold. Bring the tip of the drill bit into contact with the working surface, switch the rotary hammer on and allow it to run. If necessary, repeat the procedure until the hammering mechanism begins to operate. * The function selector switch might be set to “Drilling without hammering”. Set the function selector switch to “Hammer drilling”.
What to do if 1 LED on the Hilti TE 6-A22 Rotary Hammer battery blinks?
If only 1 LED on the battery of your Hilti Rotary Hammer is blinking, it could mean either: * The battery is discharged. In this case, change the battery and charge the empty battery. * The battery is either too hot or too cold. Let the battery cool down or warm up to room temperature.
How to fix Hilti TE 6-A22 Rotary Hammer when the LEDs on the battery indicate nothing?
If the LEDs on the battery of your Hilti Rotary Hammer aren't lighting up, here's what you can check: * The battery may not be fully inserted. Push the battery in until you hear a double click. * The battery could be discharged. Try changing the battery and charging the empty one. * The battery might be too hot or too cold. Allow the battery to reach room temperature.
Crucial safety instructions applicable to all power tools for safe operation.
Ensures safe operating conditions by maintaining a clean and hazard-free workspace.
Precautions to prevent electric shock during tool operation.
Guidelines for operator alertness, PPE, and safe handling practices.
Specific safety advice for using hammer functions on the tool.
Ensures operator safety with specific precautions for rotary hammer use.
Instructions for correctly inserting the battery pack into the tool.
Procedure for safely detaching the battery pack from the tool.
Steps to attach and secure the auxiliary side handle.
Guide to installing and setting the depth gauge for drilling accuracy.
Procedure for inserting and securing accessory tools into the chuck.
Steps to safely detach accessory tools from the chuck.
General guidelines for cleaning and maintaining the tool.
Troubleshooting common issues when the tool is not functioning.
Troubleshooting common issues while the tool is operating.
General| Drilling | Yes |
|---|---|
| Chuck type | SDS Plus |
| Product color | Black, Red |
| Country of origin | Germany |
| Rated speed (max) | 1050 RPM |
| Impact energy (max) | 2.5 J |
| Vibration level (hammer drilling) | 13.4 m/s² |
| Drilling diameter in concrete (max) | - mm |
| Optimum drilling diameter (concrete) | 4 - 20 mm |
| Input power | - W |
| Power source | Battery |
| AC input voltage | 22 V |
| Battery capacity | 32 Ah |
| Quantity per shipping (inner) case | 1 pc(s) |
Weight and Dimensions| Weight | 3700 g |
|---|---|
| Package depth | 3456 mm |
| Package width | 2000 mm |
| Battery weight | 1002 g |
| Package height | 4500 mm |
| Package weight | 4500 g |
To Next Page
