Why Hilti TE 3-C Rotary Hammer doesn't achieve full power?
If your Hilti Rotary Hammer isn't reaching its full power, the issue might be with the extension cord. Ensure you are using an extension cord that has an adequate conductor cross section to provide sufficient power to the tool.
What to do if my Hilti Rotary Hammer has no hammering action?
If your Hilti Rotary Hammer isn't hammering, there could be a couple of reasons: 1. **Tool is too cold:** Try bringing the tip of the drill bit into contact with the working surface, switch the rotary hammer on and allow it to run. If necessary, repeat the procedure until the hammering mechanism begins to operate. 2. **Function selector switch:** Check that the function selector switch is set to the “Hammer drilling” position and not “Rotary drilling only”.
How to fix a Hilti TE 3-C that doesn’t start?
If your Hilti Rotary Hammer isn’t starting, the problem might be due to an interruption in the electric supply. To check this, plug in another electric tool or appliance into the same outlet to see if it works.
Guide on manual usage, explanation of safety warnings (DANGER, WARNING, CAUTION), and common documentation symbols.
Details on product designation, serial number recording, and general safety instructions for power tool operation.
Covers personal safety, proper tool use, maintenance, storage, and specific warnings for hammer drilling operations.
Focuses on work area safety, electrical checks, and identification of tool parts and operating controls with diagrams.
Details the product's intended applications, provides examples, and lists the items supplied with the rotary hammer.
Provides detailed technical specifications, performance data, and operating ranges for TE 3-M and TE 3-C models.
Instructions for fitting accessories, selecting drilling/hammering/chiseling modes, and managing rotation direction.
Guidelines for cleaning, maintaining air vents, and general care to ensure the tool's longevity and optimal performance.
Offers solutions for common operational issues like the tool not starting or lacking hammering action, with potential causes.
Provides guidance on proper tool disposal, recycling options, and how to obtain warranty information from Hilti.
General| Drilling | Yes |
|---|---|
| Chuck type | SDS Plus |
| Product color | Black, Red |
| Country of origin | Germany |
| Input power | 850 W |
| Power source | AC |
| Power plug type | Type C |
| Impact rate | 5160 bpm |
| Rated speed (max) | 1300 RPM |
| Impact energy (max) | 2.5 J |
| Vibration level (hammer drilling) | 15.5 m/s² |
| Drilling diameter in concrete (max) | 28 mm |
| Optimum drilling diameter (concrete) | 6 - 16 mm |
| Noise level | 92 dB |
| Number of shipping (inner) cases per master (outer) case | 1 pc(s) |
Weight and Dimensions| Weight | 3000 g |
|---|---|
| Package depth | 3456 mm |
| Package width | 2000 mm |
| Package height | 4500 mm |
| Package weight | 4500 g |
To Next Page
