EasyManuals Logo

Hilti TE 3000-AVR Original Operating Instructions

Hilti TE 3000-AVR
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
*2190684*
2190684 English 1
1 Information about the documentation
1.1 About this documentation
Read this documentation before initial operation or use. This is a
prerequisite for safe, trouble-free handling and use of the product.
Observe the safety instructions and warnings in this documentation and
on the product.
Always keep the operating instructions with the product and make sure
that the operating instructions are with the product when it is given to
other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the
product. The following signal words are used:
DANGER
DANGER !
Draws attention to imminent danger that will lead to serious personal
injury or fatality.
WARNING
WARNING !
Draws attention to a potential threat of danger that can lead to serious
injury or fatality.
CAUTION
CAUTION !
Draws attention to a potentially dangerous situation that could lead to
slight personal injury or damage to the equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household
waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
Printed: 05.02.2019 | Doc-Nr: PUB / 5364012 / 000 / 01

Other manuals for Hilti TE 3000-AVR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hilti TE 3000-AVR and is the answer not in the manual?

Hilti TE 3000-AVR Specifications

General IconGeneral
Impact energy68 J
AVRYes
Voltage230 V
Cord Length4 m
Full hammering frequency860 impacts/minute
Power sourceElectric
Tool chuck typeTE-H
Chiseling application typeHeavy-duty
Frequency50/60 Hz

Related product manuals