Need help?Do you have a question about the Hilti TE 905-AVR and is the answer not in the manual?
Explains the meaning of signal words like CAUTION and NOTE used in operating instructions.
Illustrates warning signs, obligation signs, and common symbols found in the manual for user guidance.
Identifies and lists the main operating controls and components of the TE 905-AVR tool.
Guides users on where to find the tool's type designation and serial number for service inquiries.
Details the tool's intended use, components like chucks, switches, grips, and features like lubrication and indicator lamps.
Lists the items that are included with the tool upon purchase, such as the toolbox and cleaning cloth.
Details compatible tools and accessories for the TE 905-AVR, including chisels and support systems.
Presents detailed technical specifications, electrical information, and noise/vibration data for the tool.
Provides fundamental safety guidelines and emphasizes the importance of reading instructions before operation.
Details essential measures for ensuring a safe working environment, including lighting, ventilation, and keeping the area tidy.
Advises on safe handling and maintenance of mechanical aspects, including insert tools and chuck security.
Covers crucial electrical safety points, such as checking cords, avoiding damage, and proper plug handling.
Highlights the risk of hot insert tools and the need for protective gloves during handling.
Specifies that the tool is for professional use and must be operated by authorized, trained personnel.
Outlines the necessary personal protective equipment for users and bystanders, including eye, ear, and hand protection.
Guides users on checking the tool, extension cords, and power sources before commencing operation.
Instructions on adjusting the side handle, fitting, and removing insert tools for optimal use.
Details the chiseling process including switching on/off, technique, direction, and contact pressure.
Provides specific advice for effective chiseling, including handling reinforcing bars and optimizing chisel angles.
Guidance on cleaning, protecting, and regrinding insert tools for longevity and performance.
Instructions for cleaning and maintaining the outer casing, grip surfaces, and ventilation slots.
Explains the meaning of the service indicator lights and blinking, and when to return the tool for service.
Lists common faults, their possible causes, and recommended remedies for the tool.
Provides instructions for dismantling and recycling the tool and its components according to material types.
Details the warranty coverage, validity period, and exclusions for the Hilti tool.
Declares that the TE 905-AVR breaker complies with relevant EU directives and standards.
Lists measured sound power levels, conformity assessment procedures, and notified body information.
General| Power | 1600 W |
|---|---|
| Single impact energy | 20 J |
| Vibration reduction | Yes |
| Chiselling Uncertainty (K) | 1.5 m/s² |
| Length | 680 mm |
| Impact Energy | 20 J |
| Voltage | 230 V |
| Frequency | 50-60 Hz |
| Tool Type | Demolition Hammer |
| Power Source | Electric |
To Next Page
