Need help?Do you have a question about the Hilti TE 4-A22 and is the answer not in the manual?
General| Voltage | 21.6 V |
|---|---|
| Tool Chuck Type | SDS-Plus |
| Number of Gears | 1 |
| Drilling Mode | Hammer drilling, Drilling only |
| Reversing Switch | Yes |
| Battery Type | Li-ion |
| Max Drilling Diameter (Wood) | 20 mm |
| Max Drilling Diameter (Steel) | 13 mm |
| Tool Holder | SDS-Plus |
| Hammer Drilling Diameter Range | 4 - 18 mm |
| No-load Impacts Per Minute | 0 - 5200 ipm |
To Next Page
