Hilti TE 706-AVR User Manual

13
en
5. Safety rules
5.1 General safety rules
-WARNING- Read all instructions! Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury. The term "power tool" in all of
the warnings listed below refers to your mains operated
(corded) power tool or battery operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS
5.1.1 Work area
a) Keep the work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c)Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never mod-
ify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded sur-
faces such as pipes, radiators, ranges and refrig-
erators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors, use an exten-
sion cord approved for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
5.1.3 Personal safety
a) Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use
a power tool while you are tired or under the influ-
ence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
4. Technical data
Power tool TE 706/TE 706-AVR
Rated power input
Rated voltage
Rated current
Mains frequency 50–60 Hz
Weight of tool 7.2 kg
Dimensions (L × W × H) 560 × 125 × 250 mm
Chuck TE-Y (SDSmax)
Hammering speed under load 2760 blows/min
Single impact energy 6–10 joules
Chiseling performance in medium-hard
concrete 750 cm
3
/min
Double insulated (in accordance with
EN 60745) Protection class II Z
Interference immunity In accordance with EN 55014-2
Radio and television interference suppression In accordance with EN 55014-1
● Typical A-weighted sound power TE 706 101 dB (A)
level: TE 706-AVR 98 dB (A)
● Typical A-weighted sound pressure TE 706 90 dB (A)
level: TE 706-AVR 87 dB (A)
Wear ear protection!
For the given sound power level as per
EN 60745, the tolerance is 3 dB.
● Typical weighted vibration at the grip: TE 706 13 m/s
2
TE 706-AVR 5 m/s
2
Right of technical changes reserved.
1200 W
100 V
12.3 A
1200 W
110 V
11.1 A
1180 W
120 V
9.9 A
1200 W
220 V
9.0 A
1200 W
230 V
8.7 A
1200 W
240 V
8.6 A

Hilti TE 706-AVR Specifications

General

Brand	Hilti
Model	TE 706-AVR
Category	Power Tool
Language	English