Need help?Do you have a question about the Hilti TE15 and is the answer not in the manual?
General| Brand | Hilti |
|---|---|
| Model | TE15 |
| Category | Rotary Hammer |
| Language | English |
Ensure extension cords are in good condition and heavy enough for the product's current draw to prevent voltage drop and overheating.
Use only extension cords intended and marked for outdoor use when operating the tool outdoors.
Remain attentive, use common sense, and avoid operating the tool when tired for safe operation.
Inspect the tool for damaged parts before further use and ensure proper alignment and function.
Utilize only accessories and attachments recommended in the operating instructions to prevent personal injury.
Ensure repairs are performed by qualified electrical specialists to avoid accident hazards.
Use ear protection when operating the tool for extended periods to prevent hearing damage.
Always use the supplied side handle, keep it secured, maintain proper footing, and control the tool firmly.
Grasp the tool by its handles and avoid touching uninsulated metal parts to prevent electric shock.
When servicing, always use identical replacement parts to ensure the tool's safety and performance.
Understand how polarized plugs reduce electric shock risk and ensure proper outlet fit.
Details on the tool's electrical input power, voltage versions, and current consumption.
Information on speed, hammering rate, impact energy, and drill bit size range.
Data on drilling efficiency in concrete and the type of chuck used for bit connection.
Highlights features like double insulation, slip clutch, and product certifications (UL/CSA).
Verify electric supply, ensure double insulation, avoid excessive pressure, and maintain chuck lubrication.
Tips for starting the tool in cold conditions by briefly jolting the drill bit.
Emphasizes that servicing must be performed by qualified specialists using original Hilti repair parts.
Instructions on how to properly insert and secure a drill bit into the chuck.
Guide on shifting the setting lever for hammer drilling into concrete, masonry, and stone.
Instructions for engaging the rotary drilling mode using the setting sleeve.
Step-by-step procedure for removing and attaching the chuck, including notes on keyless chuck operation.
Guidance on unscrewing the side handle to adjust the depth gauge and then retightening it.
To Next Page
