To Next PageTo Next Page
Need help?Do you have a question about the Hilti TE16-C and is the answer not in the manual?
General| Weight | 4.2 kg |
|---|---|
| Impact energy | 2.0 J |
| Drilling diameter in steel | 13 mm |
| Drilling diameter in wood | 30 mm |
| Working Mode | Hammer drilling, Drilling |
| Width | 100 mm |
| Full Hammering Frequency | 0 - 4, 800 bpm |
| RPM | 0 - 1, 100 rpm |
| Chuck Type | SDS Plus |
| Power Consumption | 650 W |
| No-load Speed | 0 - 1, 100 rpm |
| Impact Rate | 0 - 4, 800 bpm |
| Tool Holder | SDS Plus |
| Drilling Diameter Range in Concrete with Core Bits | 40 mm |
Explains the meaning of CAUTION and NOTE symbols for safety warnings.
Displays warning, obligation, and information symbols used throughout the manual.
Details where to find the tool's type designation and serial number on the product.
Defines the tool's intended applications in concrete and masonry, including light chiseling.
Lists the available chuck types, TE-C (SDS plus) and TE-T (SDS top).
Explains the function selector switch and speed control switch.
Mentions the adjustable side handle with depth gauge and vibration-absorbing grip.
Highlights the mechanical slip clutch as a safety feature.
Specifies that the tool utilizes oil lubrication.
Lists the standard accessories included with the electric tool.
Lists compatible chisel types with TE-C or TE-T connection ends.
Specifies the diameter range for wood drill bits, up to 13 mm.
Specifies the diameter range for metal drill bits, up to 13 mm.
Details diameter ranges for stepped drill bits for metal in different gears.
Lists the diameter range for mixing paddles for non-inflammable substances.
Mentions the availability of the TE DRS-S dust removal system.
Notes the optional availability of the TPS theft protection system.
Provides general safety advice and explains CAUTION and NOTE meanings.
Outlines safety measures for the work environment, including tidiness and PPE.
Covers essential safety practices for tool operation, handling, and environmental factors.
Warns about mechanical risks and emphasizes proper maintenance and tool checks.
Addresses risks related to electricity, cord handling, and tool condition.
Advises caution regarding hot insert tools and the need for protective gloves.
Specifies the requirement for breathing protection when dust is generated.
Details requirements for using approved extension cords based on mains voltage and length.
Specifies conditions for powering the tool with a generator or transformer.
Provides step-by-step instructions for attaching and securing the side handle.
Explains how to adjust the depth gauge for precise drilling depth.
Details the procedure for inserting and engaging TE-C type tools into the chuck.
Describes how to remove TE-C type tools from the chuck using the locking sleeve.
Details the procedure for inserting and engaging TE-T type tools into the chuck.
Describes how to remove TE-T type tools from the chuck using the locking ring.
Explains how to detach the chuck from the tool by pulling the retaining ring.
Explains how to attach the chuck to the tool by engaging the sleeve.
Describes the activation process for the theft protection system using an electronic key.
Guides on performing drilling without hammering in the '2' setting.
Guides on performing drilling without hammering in the '1' setting.
Details how to perform hammer drilling, including notes on low temperatures.
Explains the chiseling function and how to adjust the chisel position.
Details how to adjust the chisel to the desired position for optimal use.
Explains how to lock the chisel in place using the function selector switch.
Describes how to change the rotation direction of the tool using the switch.
Provides instructions for cleaning and protecting insert tools from corrosion.
Guides on cleaning the tool's exterior, ventilation slots, and grip surfaces.
Covers general maintenance checks and repair guidelines by qualified specialists.
Emphasizes checking that all protective equipment is refitted and parts function correctly.
Lists possible causes for the tool not starting and their remedies.
Explains potential reasons for no hammering action and how to resolve them.
Addresses issues related to reduced tool power and provides solutions.
Details causes and fixes when the drill bit fails to rotate.
Provides solutions for situations where the drill bit is stuck in the chuck.
Offers remedies for when the drill bit is not advancing during operation.
