Need help?Do you have a question about the Hilti TE5 and is the answer not in the manual?
General| Drilling Diameter in Concrete | 20 mm |
|---|---|
| Dust Removal Module Available | Yes |
| Forward/Reverse Switch | Yes |
| Voltage | 230 V |
| Tool Chuck Type | SDS Plus |
| Functions | Hammer drilling, Drilling |
| Rotation Speed | 0-1100 rpm |
Covers essential safety practices like work area cleanliness, environment consideration, child safety, and proper tool storage.
Details on safe tool operation, including not forcing the tool, using the right tool, proper dress, and cord care.
Guidance on selecting and using extension cords, including a table for correct gauge based on length and current.
Recommendations for safety glasses, face/dust masks, ear protection, and appropriate footwear during operation.
Instructions on checking for damaged parts, using only specified accessories, and ensuring repairs are done by specialists.
Lists key technical data including power input, voltage, current, speed, impact energy, and drill bit diameter range.
Describes features like double insulation, carbon brushes with automatic cut-out, slip-type clutch, and variable speed control.
Instructions on cleaning the drill bit connection and applying lubricant spray for optimal performance.
Details on inserting drill bits, selecting hammer or rotary drilling, and using the reversing switch.
Procedures for changing the chuck and adjusting the side handle with depth gauge for precise drilling.
Explanation of double insulation and guidance on selecting appropriate extension cords for the tool's power requirements.
To Next Page
