Need help?Do you have a question about the Hilti TE56 and is the answer not in the manual?
General| Type | Rotary hammer |
|---|---|
| Chiseling | Yes |
| Dust Removal Module Available | Yes |
| Voltage | 230 V |
| Tool Holder | SDS-plus |
| Power Source | AC |
Explains the meaning of signal words like CAUTION and NOTE used in the manual.
Illustrates and explains warning signs, obligation signs, and symbols used in the manual.
Details the intended use and working environment for the combihammer.
Describes the chuck types for TE 46 and TE 56/TE 56-ATC, and the speed control switch.
Outlines grips, safety features like slip clutch and ATC, lubrication, and indicator lamps.
Covers fundamental safety rules, general handling, and storage of the tool.
Details measures for workplace safety and electrical precautions to prevent hazards.
Focuses on safety aspects related to the tool's mechanical components and insert tools.
Advises on thermal hazards from tools and dust protection measures.
Outlines user qualifications and required personal protective equipment for safe operation.
Step-by-step guide on how to attach and position the side handle.
Instructions on how to install and secure the depth gauge.
Recommendations for using extension cords and powering the tool with generators.
Instructions for fitting, removing, and adjusting the depth gauge for insert tools.
Detailed procedures for hammer drilling and drilling without hammering.
Explains how to set up and perform chiseling, including chisel positioning and power settings.
Describes how to lock the control switch for continuous operation during chiseling.
Advice on cleaning and maintaining insert tools and the electric tool's exterior.
Explains the service indicator lights and recommends regular maintenance checks.
Identifies common faults, their possible causes, and recommended remedies for the tool.
Provides guidance on dismantling the tool and recycling its various components and materials.
Details the terms and conditions of the Hilti tool warranty, including coverage and exclusions.
States the product's compliance with relevant EC directives and standards.
To Next Page
