X-DI 32 02 4 Start-up
HI 801 017 E Rev. 4.00 Page 43 of 56
When redundantly wired as specified in Figure 14:, the modules are inserted in the base
plate next to each other and on a common connector board. Connector boards
X-CB 005 02 (with screw terminals) or X-CB 005 04 (with cable plug) can be used.
X-DI 32 02
Connector Board
DI-
S-
S+
DI+
DI_R+
X-DI 32 02
DI-
S-
S+
DI+
DI_R+
1
2
1
2
Proximity Switch Supply Analog Measurement Processing
Figure 14: Redundant Proximity Switch or Wired Contact Maker
To Next Page
Loading...
