3 Product Description X-DO 32 01
Page 18 of 52 HI 801 097 E Rev. 4.00
Digital Outputs
Number of outputs (number of channels) 32, non-galvanically isolated
Output voltage ≥ L+ minus internal voltage drop
Voltage drop (with high level) 1.3 V at 0.75 A output current
Nominal rated current (with high level) 0.5 A, range 0...0.6 A
Total current permitted for the module 12 A
Leakage current (with low level) 20 µA
Current limiting in the event of short-circuit 2 A, each channel
Overcurrent interruption I > 0.8 A for t > 50 ms
Ohmic load To nom. rated current 0.5 A
Inductive load 10 H
Capacitive load 100 µF
Lamp load (24 V) 4 W
SC Limit 0.8 A, range 0.8...0.85 A
Overload protection of the outputs,
transient
33 V (max. 43 V)
Switching time of the channels (with ohmic
load)
≤ 100 µs
Test impulse (with ohmic load) 200 µs
Behavior upon overload
The affected output is switched off and re-
started cyclically.
Table 8: Specifications for the Digital Outputs
To Next Page
Loading...