HIMA HIMax X-DO 32 01 - Index of Tables

Appendix X-DO 32 01
Page 50 of 52 HI 801 097 E Rev. 4.00
Index of Tables
Table 1: Additional Relevant Manuals 5
Table 2: Environmental Requirements 8
Table 3: Blinking Frequencies of LEDs 15
Table 4: Module Status Indicators 15
Table 5: System Bus Indicators 16
Table 6: I/O LEDs 16
Table 7: Product Data 17
Table 8: Specifications for the Digital Outputs 18
Table 9: Available Connector Boards 19
Table 10: Position of Coding Wedges 20
Table 11: Terminal Assignment for Connector Boards with Screw Terminals 22
Table 12: Cable Plug Properties 23
Table 13: Pin Assignment for the System Cable Plug 25
Table 14: Cable Data 26
Table 15: Available System Cables 26
Table 16: Relationship between Test Pulse Duration and SC Interval 33
Table 17: Module Tab in the Hardware Editor 35
Table 18: Tab: I/O Submodule DO32_01 in the Hardware Editor 36
Table 19: Tab: I/O Submodule DO32_01: Channels in the Hardware Editor 37
Table 20: Submodule Status [DWORD] 38
Table 21: Diagnostic Information [DWORD] 39