X-DO 32 01 Appendix
HI 801 097 E Rev. 4.00 Page 49 of 52
Index of Figures
Figure 1: Sample Type Label 11
Figure 2: Block Diagram 13
Figure 3: Indicators 14
Figure 4: Views 17
Figure 5: Coding Example 20
Figure 6: Connector Boards with Screw Terminals 21
Figure 7: Connector Boards with Cable Plug 24
Figure 8: System Cable X-CA 006 01 n 26
Figure 9: Inserting the Connector Board 29
Figure 10: Securing the Connector Board with Captive Screws 30
Figure 11: Mounting and Removing a Module 32
Figure 12: 1-Pole Wiring of Amplifiers and Actuators 40
Figure 13: 2-Pole Wiring of Actuators 40
Figure 14: Redundant Wiring of Actuators 41
Figure 15: Wiring Inductive Loads 41
Figure 16: Wiring Actuators via Field Termination Assembly 42
To Next Page
Loading...