DESCRIPTION AND GENERAL CHARACTERISTICS | PAGE 3
1. DESCRIPTION AND GENERAL
CHARACTERISTICS
The control panel and the protection are presented in a 66 x 66 x 85 mm box for
panel mounting. Manufactured in aluminium and reproof polyamide 6 (Class
V0), its colour is black.
It incorporates the possibility of starting the engine manually or automatically
(through free voltage contact) and of protecting it against any malfunctions while
it is running. This is managed by an electronic circuit based on a microcontroller,
which is located inside the control unit.
At the front, there is a button to turn the control unit on or off, a reset button, a
knob to select MANUAL, STOP or AUTOMATIC mode, and 14 indicator lights. At
the back there are: 19 plug-in connection terminals divided into three blocks, a
USB port for programming and consulting the alarms log and the hour metres,
plus 8 micro switches with which to congure the operation.
The general characteristics are as described below:
1. Supply voltage 8/36V
2. Start-up by free voltage contact (LT)
3. Engine protection devices:
• Fuel reserve
• Battery charging failure
• High engine coolant temperature
• Low oil pressure
4. Protection against over-frequency (overspeeding):
• By generator set
• By Pick-Up
5. Auxiliary input with alarm indicator light
6. All outputs can be short circuited
7. Quick connect terminals
To Next Page
Loading...
