iii
Safety
DANGER
This equipment is designed according to IEC
1010 Safety Standards, and has been tested for
safety prior to shipment. Incorrect
measurement procedures could result in injury
or death, as well as damage to the equipment.
Please read this manual carefully and be sure
that you understand its contents before using
the equipment. The manufacturer disclaims all
responsibility for any accident or injury except
that resulting due to defect in its product.
Safety
This Instruction Manual provides information
and warnings essential for operating this unit
in a safe manner and for maintaining it in
safe operating condition. Before using this
unit, be sure to carefully read the following
safety notes.
To Next Page
Loading...
