Need help?Do you have a question about the Hioki 3158 and is the answer not in the manual?
General| Brand | Hioki |
|---|---|
| Model | 3158 |
| Category | Test Equipment |
| Language | English |
Title of the manual for the Hioki 3158 AC Withstanding Voltage HiTester.
Overview of the 3158 AC Withstanding Voltage HiTester features and capabilities.
Identifies and explains the front and rear panel components of the 3158 unit.
Instructions for safely connecting the protective ground terminal to ensure electrical safety.
Emphasizes the necessity of wearing high-voltage protective rubber gloves for safety.
Guidelines for connecting the external I/O connector, including safety precautions.
Steps and safety precautions for connecting the power cord to the unit and outlet.
Explains the different operating states of the 3158 and how to set parameters.
How to configure the unit in the READY state before starting tests.
Procedure for entering the SETTING state to configure test parameters.
Flowchart and steps for initiating a test sequence.
How the unit determines and indicates PASS or FAIL results.
How to retain the PASS state after test completion for verification.
How to retain the FAIL state after test completion for verification.
How to hold the current state when testing is interrupted.
How to enable current output only while the START key is held down.
Describes the function for saving up to twenty parameter sets for quick recall.
Describes the function for loading previously saved parameter sets.
Explains the function of the external I/O terminal for status signals and control inputs.
Information on buzzer sounds during screening and error conditions, and how to adjust volume.
Details the RS-232C settings, electrical characteristics, and connector pinout.
How to connect the unit to a PC using a cross cable and necessary settings.
Explains how commands are sent and responses are received between the computer and the unit.
Lists and explains the available commands for controlling the unit via RS-232C.
Regular maintenance procedures and information on replaceable parts and lifespan.
Instructions and safety precautions for replacing the power fuse.
Lists common symptoms and their solutions for diagnosing problems.
Procedure for resetting the system to initial settings.
Technical specifications including voltage, current, waveform, and timer settings.
General information about operating conditions, power supply, dimensions, mass, and accessories.
To Next Page
