Hioki 3158 - Installation of the Unit

15
────────────────────────────────────────────────────
2.8 Installation of the Unit
────────────────────────────────────────────────────
2
4
5
6
7
8
9
10
11
12
13
14
A
NOTE
2.8 Installation of the Unit
Install the unit on a stable surface using the four rubber feet on the bottom of the
unit.
Install on a stable surface using the four stands on the bottom of the unit.
(1) Temperature 0to40
℃
,23
±
5
℃
recommended for high-precision
measurements.
(2) Humidity 80 %RH max. (no condensation)
(3) Avoid the following locations:
･
Subject to direct sunlight.
･
Subject to high levels of dust, steam, or corrosive gases (Avoid using the
equipment in an environment containing corrosive gases (e.g., H
2
S, SO
2
,NI
2
,
and CI
2
) or substances that generate harmful gasses (e.g., organic silicones,
cyanides, and formalins)).
･
Subject to vibrations.
･
In the vicinity of equipment generating strong electromagnetic fields.
Noise from the unit may affect peripheral equipment.