58
────────────────────────────────────────────────────
4.10 Example of Optional Function Settings
────────────────────────────────────────────────────
4.10 Example of Optional Function Settings
Assume that the 3158 is in the READY state, with the PASS Hold function and
FAIL Hold function disabled. The following example shows how to activate the two
functions:
(1) While holding down the
SHIFT
key, press the
STOP
keytoswitchtothe
Optional Function Setting screen.
(2) The first and second figures from the left are set at "0: Not held," as the PASS
Hold function and the FAIL Hold function are inactive. Change the numbers to
"1."
The flashing cursor is at the PASS Hold function. Press the
/ keys to set
it to "1: Hold." This setting enables the PASS Hold function.
(3) Next, activate the FAIL Hold function. Press the
key once to move the
flashing cursor to the FAIL Hold function.
(4) Using the
/ keys, select "1: Hold." This setting enables the FAIL Hold
function.
(5) While holding down the
SHIFT
key, press the
STOP
key to finalize the new
settings for the optional functions. Following finalization, the unit returns to the
READY state.
To Next Page
Loading...
