15
Chapter 2 Measurement Procedure
NOTE
2.4 Data Hold Function HOLD
2.5 Recording Function REC
This function allows freezing the display at
any desired point for easy reading.
1. Press the
HOLD
key. The
HOLD
indication
appears on the display and the digital display
value is maintained.
To cancel the data hold function, press the
HOLD
key again.
The recording function can be used to display
the maximum display value, minimum
display value, maximum/minimum average,
and the instantaneous value.
1. Press the
RANGE
key to select the current
measurement range.
2. Press the
MAX/MIN
key while measuring
current with the conductor clamped. The REC
indication flashes and the maximum,
minimum, or average value for the period
startingwhenthekeywaspressedtothe
present point can be displayed. The
instantaneous value can also be displayed.
Only one of these values can be shown at any
one time, but the other values are kept in
memory.
･ Pressing the
MAX/MIN
key during auto-
ranging (AUTO) fixes the range at the current
setting.
To Next Page
Loading...
