Hioki BT3554-50 - Page 129

115
Automatic Power Saving Function (APS)
Enabling/disabling the automatic power saving
Enabled: Turning o󰀨 the instrument automatically
Disabled: Not turning o󰀨 the instrument automatically
1
Turn o󰀨 the instrument.
(When enabled)
2
Switch over the display to
automatic power saving
setup mode.
3
Choose between [oFF] and
[on].
(When disabled)
4
Conrm your entry.
The instrument will be restarted.
The settings will not change
if the instrument is turned o󰀨
without your conrmation.
• For continuous use of the instrument, disable the APS function.
(Default setting: enabled)
• If the display unintentionally switches over to automatic power
saving setup mode, cycle the instrument. The instrument will be
turned on without changing the settings.
HIOKI BT3554F961-00HIOKI BT3554F961-00