14
Operating Precautions
Precautions for measurement
DANGER
To prevent an electric shock, be careful to avoid
shorting live lines with the test lead tip.
WARNING
• Do not use the instrument to measure circuits that
exceed its ratings or specications. Damage to the
instrument can cause an electric shock.
• Do not measure any voltage that would exceed the
instrument’s maximum input voltage (terminal-to-
terminal) or maximum rated line-to-ground voltage
of 60 V.
Maximum input voltage
(terminal-to-terminal)
60 V DC
Maximum rated
voltage to earth
60 V DC
• Do not measure AC voltage.
HIOKI BT3554F961-00HIOKI BT3554F961-00
To Next Page
Loading...
