Hioki CM4375 - Capacitance and Temperature Correction Specs; Max Capacity, Inductive Load, and Temp Correction

36
Input specications/Measurement specications
Display update rate *
2
AUTO A/AC current/DC current/
AC+DC current
5 times/sec.
Current frequency 0.3 times to 5.0 times/sec. (varies
depending on the frequency.)
DC power 1 time/sec.
DC current+DC voltage 2.5 times/sec.
Zero-display range AUTO A/AC current/DC current/
AC+DCcurrent
5 counts or less
Crest factor AUTO A/AC current/AC+DC current/
INRUSH (inrush current)
1.5 (1000 A or less)
Frequency detection
input level
1000 A range 5.0 A or more
INRUSH
Trigger level
+10 A or more or

10 A or less
Peak detection time
width
1 ms or more (when lter is off)
*1: Does not apply to AC detection in AUTO A mode.
*2: Does not include range change time.