8
GENNECT
Cross
Wireless communication is
supported in combination with
the wireless adapter Z3210 (sold
separately). In addition to working
with the free "GENNECT Cross"
application, the Excel® direct
input function can also be used.
The DT4261-90, a set of DT4261
and Z3210, is also available. It is
more economical than purchasing
the DT4261 and Z3210 separately,
and allows you to build a wireless
communication environment with one
purchase.
WIRELESS ADAPTER
Z3210
Easily go wireless and manage
your data digitally
DT4261-90
(Z3210 set product)
When Z3210 is installed
Middle model
Supports wireless communication to
increase work efciency
DC V typical accuracy: ±0.15% rdg. ±2 dgt.
Measurement categories: CAT III (1000 V), CAT IV (600 V)
Multi-functional, for
on-site maintenance
DT4261
Go wireless with the Z3210!
For trouble analysis in the eld.
AC clamp-on measurement
Frequency
Resistance Continuity check
Temperature Diode test
Capacitance Conductance
AC/DC automatic detection
Voltage detection function
DC voltage
600.0 mV to 1000 V
AC voltage
6.000 V to 1000 V
DC + AC voltage
6.000 V to 1000 V
DC current
600.0 mA to 10.00 A
AC current
600.0 mA to 10.00 A
Supported measurement parameter Unsupported measurement parameter
*The range gures given indicate the instrument’s measurement ranges. Not the range of measurable values. Please see page 16 for details.
To Next Page
Loading...
