Hioki DT4200 Series - Page 9

9
Terminal shutter closes on unused
terminals depending on the mea-
surement function
Prevents incorrect current measure-
ment with the Fuse Check function
When combined with GENNECT Cross, the DT4261
you can perform simple harmonic analysis. Appli-
cations include harmonic measurement of power
conditioners for solar systems and problem analysis
of power supply systems.
The wireless adapter Z3210 (sold separately)
comes standard with an Excel
®
direct input function.
It enables direct transfer and input of measure-
ment data to templates created in Excel
®
leading to
increased work efciency in the eld.
Problems that can be caused by harmonics
• Equipment burn-out and destruction due to overheating
• Malfunctions of power control devices
• Reduced service life and efciency for power devices
Troubleshoot in the eld
Improve work efciency!
Labor-saving measurement with
digitalization
UNLOCK
CAT Ⅳ 600 V
CAT Ⅲ 1000 V
CAT Ⅱ 1000 V
LOCK
SLIDE
Link with GENNECT Cross
Excel
®
Direct Input Function
Functions and Features
AC contacts
DC contacts
The DT4261’s terminal shutters are linked to
the instrument’s rotary switch. They block
access to test lead terminals that aren’t being
used, making it physically impossible to
insert a lead into the wrong terminal.
When switching from the clamp function to
the current function, a fuse disconnection
check is automatically performed.
This allows the user to know if the fuse is
broken before current measurement, which
prevents erroneous measurement.
Automatic switching of measurement
in locations where AC and DC
voltages are mixed
When making measurements in locations
with both AC and DC voltages, automatic
switching eliminates the need to operate the
rotary switch and helps prevent
measurement mistakes.
Manage measurement data on a computer
Measurement results can be downloaded to
a computer via a USB connection. Once
downloaded, you can save them as a le
(text format) or display them as a graph using
the desired interval. Results can also be sent
in real time while measurement is ongoing.
Using the Communication Package DT4900-01 (sold separately)
Free up hands for work with the magnetic
strap* and auto-hold function
Test leads with an integrated cap
for greater convenience and safety
By using the magnetic strap to secure the
instrument to the wall and the auto-hold
function to automatically stop display values,
you can free your hands, making it easier to
record measured values and signicantly
boosting work efciency.
The L9300 test lead with an integrated cap is
included as a standard. The nger guard can
be easily slid to switch between measurement
categories without worrying about losing the
cap.
*The Magnetic Strap is sold separately