Hioki IR4057-50 - Wireless Communications Function (IR4055 and IR4057-50 Only); Using the GENNECT Cross

51
Wireless Communications Function (IR4055 and IR4057-50 only)
3.10 Wireless Communications Function
(IR4055 and IR4057-50 only)
Using the GENNECT Cross
This function is only available on the IR4055 and the IR4057-50.
When the wireless communications function is enabled, you can
review measurement data and create measurement reports on
mobile devices. For details, see the Help function in the GENNECT
Cross (application software, free of charge).
GENNECT Cross Ofcial Website
https://gennect.net/en/cross/index
1
(IR4057-50 only) Install the Z3210 Wireless Adapter (option)
to the instrument. (p. 27)
2
Install the GENNECT Cross on your mobile device.
3
Turn on the IR4055 or
IR4057-50 to enable the
wireless communications
function.
IR4055
COMP key
1 s
IR4057-50
0
Ω
ADJ key
+
COMP key
mark or mark
On: Enabled
Off: Disabled
Blinks: Communicating
4
Launch the GENNECT Cross and pair it with model IR4055
or IR4057-50. (p. 52)
5
Select the standard
measurement function and
start measurement.
1
2
4
5
6
7
付録索引
3
HIOKI IR4057B961-00