27
Installing the Z3210 Wireless Adapter (IR4057-50 only)
Removing the sleeves Attaching the sleeves
Hold the bottom of the sleeves
and pull the sleeves off. (For
safety reasons, the cap has been
manufactured to t snugly so that
it cannot be easily removed.)
Insert the metal pins of the test leads into
the holes of the sleeves, and rmly push
them all the way in.
2.3 Installing the Z3210 Wireless
Adapter (IR4057-50 only)
The wireless communications function can be used by installing the Z3210
Wireless Adapter (option) to the instrument.
WARNING
• To avoid electric shock, turn off the MEASURE
key and remove the test leads from the measuring
object before removing the battery cover.
• After installing or removing the Z3210, be sure to
reattach the battery cover and secure it in place
with the screw before using the instrument.
• To prevent instrument damage or an electric shock,
use only the screws that are originally installed for
securing the battery cover in place. If you have lost
any screws or nd that any screws are damaged,
please contact your authorized Hioki distributor or
reseller.
CAUTION
After touching any metallic part, such as a doorknob,
to eliminate static electricity from your body, connect or
disconnect the Z3210. Failure to do so could cause static
electricity to damage the Z3210.
1
3
4
5
6
7
付録索引
2
To Next Page
Loading...
