EasyManuals Logo

Hioki LR8450 Quick Start Manual

Hioki LR8450
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
8
Operating Precautions
Operating Precautions
Be sure to follow the precautions listed below in order to use the instrument safely and in a manner
that allows it to function e󰀨ectively.
Use of the instrument should conform not only to its specications, but also to the specications of
all accessories, options, and other equipment in use.
Checking safety prior to use
DANGER
Inspect the instrument and verify proper operation before use.
Use of the instrument while malfunctioning could result in serious bodily injury.
If you nd any damage, contact your authorized Hioki distributor or reseller.
For more information about inspections, see “Inspection of the instrument” (p. 49).
Installing the instrument
For more information about the instrument’s operating temperature and humidity range and its
storage temperature and humidity range, see “4 Specications” (p. 87).
WARNING
Do not install the instrument in locations such as the following:
In locations where it would be subject to direct sunlight or high temperatures
In locations where it would be exposed to corrosive or explosive gases
In locations where it would be exposed to powerful electromagnetic radiation or
close to objects carrying an electric charge
Close to inductive heating devices (high-frequency inductive heating devices,
IH cooktops, etc.)
In locations characterized by a large amount of mechanical vibration
In locations where it would be exposed to water, oil, chemicals, or solvents
In locations where it would be exposed to high humidity or condensation
In locations with an excessive amount of dust
Doing so could damage the instrument or cause it to malfunction, resulting in bodily
injury.
CAUTION
Do not place the instrument on an unstable stand or angled surface.
Doing so could cause the instrument to fall or overturn, resulting in bodily injury or
damage to the instrument.
Do not bend or pull on cables at temperatures of 0°C or lower.
Since cables become rigid, doing so could damage the insulation or cause a wire
break, resulting in electric shock.
HIOKI LR8450A963-02

Table of Contents

Other manuals for Hioki LR8450

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hioki LR8450 and is the answer not in the manual?

Hioki LR8450 Specifications

General IconGeneral
ModelLR8450
CategoryData Loggers
Dimensions330 mm (12.99 in) W × 221 mm (8.70 in) H × 120 mm (4.72 in) D
WeightApprox. 2.8 kg (excluding battery)
Operating Temperature0 to 40 °C (32 to 104 °F), 80% RH or less (no condensation)
Sampling Rate1 ms to 1 hr
MemoryInternal memory
InterfaceUSB, Ethernet
Power SupplyAC adapter or battery
Measurement RangeVaries with module
AccuracyVaries with module
Storage MediaSD card
Memory CapacityInternal memory
Input TypeVoltage, temperature
Temperature MeasurementVaries with module
Communication InterfaceUSB, Ethernet
Measurement ChannelsUp to 120 channels (with optional input modules)

Related product manuals