Hioki LR8450 - Registering the Wireless Modules

73
Preparing the Wireless Modules
Registering the wireless modules
You can register up to seven wireless modules in the LR8450-01.
It is recommended to follow the instructions of the conguration navigator when you register the
modules for the rst time.
Registering the wireless modules with the conguration navigator
Following the instructions from the registration guide, you can register the wireless modules.
See “1.15 Conguration Navigator (Quick Set)” in the Instruction Manual.
1
Place the wireless module close to the instrument to avoid communications failure.
2
Connect the AC Adapters to the instrument and the wireless modules, and turn them on.
Connection of the AC Adapters is not required when they are being battery-powered.
3
Press the QUICK SET key.
The conguration navigator menu will be displayed.
4
Press the ENTER key while [Wireless unit registration guide] is selected.
Following the instructions from the registration guide, register the wireless modules.
• List method: Allows you to choose wireless modules from the list of the modules available for
registration.
• Auto connect method: Allows you to use the keys on wireless modules to register.
Once the registration completes, the wireless module’s CONNECT LED will light up.
You can check the radio-wave strength with the instrument’s icon. See “Screen and icons” (p. 27).
Registering the wireless modules with the settings screen.
You can search for the wireless modules connectible with the instrument to register the modules.
See “1.2 Registering Wireless Modules” in the Instruction Manual.
Making Connections (Preparing for Measurement)
HIOKI LR8450A963-02